How to Properly Set Up a New Shower Unit: A DIY Solution

How to Properly Set Up a New Shower Unit: A DIY Solution

Blog Article

Give Me A Quote!

The author is making several great points about How to Install a Shower Enclosure as a whole in this post further down.

A successful shower setup calls for careful planning and also a great deal of job. Most of the times, you will need to do three sorts of jobs: framing walls, mounting the plumbing, and also completing wall surfaces.

Prep work

Firstly, you must choose the kind of shower that you want to mount. It is essential to ascertain whether the chosen shower is capable of coping with particular systems as well as can control a safe degree of water with the central heating boiler. Many shower devices nowadays are created to be versatile to various water pressures (such as kept hot water as well as cool mains).
It is additionally important to think about the water pressure as well as the preparation of the piping and drain for the shower

Various Types of Shower Units

Push-on Mixer: The hose pipe and spray parts of the push-on mixer shower system can be attached to the bath faucet as per your demand, and the water temperature level can be adjusted by means of the taps. Push-on mixers are cheap and also incredibly basic to install. However, although the hose link is simple, it is easily displaced. In addition, it is bothersome to readjust the temperature level.

Bath/Shower Mixer: The hose and also spray of this kind of shower are combined with a bathroom mixer faucet, as well as the temperature can be readjusted through the bath faucets. It is an extremely low-cost option and also no added plumbing is included. However, the bath/shower mixers likewise struggle with inconvenient temperature level control options.

Guidebook Mixer: The hose pipe and also spray of a manual mixer shower system belong of the wall device and the cold and hot water products are connected to a solitary shutoff The temperature level and also stress of the water are controlled via either one or a variety of handles (in more costly showers). Although temperature level control is a lot easier in hands-on mixer types, they are more costly than the formerly pointed out mixers. They also require additional plumbing of hot and cold supply of water pipes.

Thermostatic Mixer: The pipe and also spray of this shower type are a part of the wall surface unit and the cold and hot water supplies are linked to a single shutoff below also. It is complete with an integrated stabiliser to self-adjust the water temperature as well as to prevent it from ending up being too hot. One of the largest benefits of a thermostatic mixer shower kind consists of convenient temperature level control. Nevertheless, it is one of the most pricey of the various mixer alternatives.

Power Shower: A power shower is a single device containing a powerful electric pump that is capable of changing both the water pressure and also temperature level. This type of shower can be fitted if there is supply of water from a cold water cistern and a hot water cylinder. A power shower makes the adjustment of both pressure and temperature level very easy. On the other hand, it is unsuitable for water warmed straight by the shower or where the water is supplied by a combination central heating boiler under mains pressure.

Electric Shower: An electrical shower is plumbed right into a keys cold water supply and it heats the water electrically. It is very important to note that for this shower kind to be set up, the keys stress needs to be at least 0.7 kg/sq cm (10lb/sq in). The device permits the temperature level as well as stress to be adjusted via a handle. Designs with temperature stabilisers are much better as they continue to be unaffected by various other faucets in other places in use within the house. A significant disadvantage of electric showers is that the control handle just allows for the alternative of heats at less pressure, or reduced temperature levels at a better stress. This is troublesome in the winter when the spray is usually weak and also the keys water is colder. Nevertheless, this issue is dealt with in some models which are readily available with a winter/summer setup.

Method

Depending on the kind of shower you desire to set up, the shower head need to either be fitted in order to prevent its contact with the water in the bathroom below or the base tray, or it should have a check valve.
Before starting, it is suggested to note the settings of the shower head and also control, and to prepare the pipe-work included. Furthermore, the water drainage system to get rid of the drainage will certainly require to be intended. Both settings of the wire course as well as the shower switch will additionally require to be taken into consideration if an instantaneous or electrical shower system is being mounted.
Utilize the direction overview supplied with the shower unit to fit the shower control.Before suitable the pipes that will supply the water to the shower system, it is essential to remove the supply of water. In order to protect the pipes, they must be given a waterproof covering as well as also fitted with separating valves. The pipes can after that be buried into the wall as well as smudged over to neaten the general appearance.
Fit the base tray, shower head, as well as fittings.
Link the primary shower control to the pipes that will certainly be supplying the water (This might need a female screw string adapter).
Reconnect the water as well as test the pipelines for any leaks, as some might need tightening.
If you are setting up an electric shower, bear in mind to turn off the electrical power supply before making any electric links. When these links have actually been made (there need to be assistance within the instruction manual), the power supply can be switched back on.

Readjusting Water Pressure to Suit Your Shower

The cold water storage tank can be lifted to a better height (sometimes just 150mm (6inches)) by fitting a solid wooden assistance underneath it - possibly made up of struts and also blockboards. If you choose this alternative, the major as well as circulation pipes will also have to be increased to meet the new height of the storage tank.
Additionally, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever kind is chosen, it has to be linked right into the power supply in order to run.

Piping and Drainage

It is best to utilize 15mm diameter supply pipes, and also make the go to the shower as brief as well as straight as feasible so regarding preserve optimal stress and minimise heat loss. Furthermore, by minimising the use of joints for pipe corners, you can decrease the resistance in the flow of the supply of water. You can achieve this by flexing the pipelines instead.

Many Typical Mistakes

Breaking or ignoring neighborhood code limitations.

Utilizing pipes that are also little.

Attaching copper to galvanized without utilizing a brass or dielectric fitting between the two.

Not using tape or pipeline substance at threaded joints.

Uneven your fixtures when installing them.

Not setting up an air gap filling for fixtures.

Cutting supply stub outs as well brief to set up the shutoff valves onto after the finished wall surface is in place.

Not properly straightening tubes into fittings or quit shutoffs. (Requiring the nut onto the compression ring at an angle when the tubes is at an angle will create a leakage.).

When turning the water back on in your home, always run the outside hose shutoff or purge your commodes to bleed dust and also air from the lines. This particles can cause problems in your sink faucets and various other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

Do you like more info about How to Install a Freestand? Try to leave a comment down the page. We'd be pleased to find out your ideas about this write-up. In hopes that you visit us again in the future. Appreciated our content? Please share it. Help other people locate it. Thanks so much for your time spent reading it.

Ring, relax, resolved!

Report this page